No.8920-03
Temperature/Humidity Transmitter
SK-RHC-I
JAN code : 4974425892037
Calibration : May be available depends on probes
JCSS Accredited Calibration : May be available depends on probes
This model is one of the Temperature/Humidity Transmitter SK-RHC series with current output (4 to 20mADC). Choose either one of probes sold separately.
AC adapter is also available at an additional cost.
The image shows a combination with Plug-in Type Probe SK-RHCS-1.
Instruction manual
Feature
■ Select either one of the following output signals when you order: voltage, electric current, or RS-485. Four types of external indicators are also selectable.
■ Select the probe such as plug-in type or with-sensor-cord type when you order.
■ Equipped with Hi/Lo alarm
Description
Select one sensor probe below to purchase separately.
■ Probes for SK-RHC series
|
Plug-in Type Probe No. 8921-00 SK-RHCS-1 |
|
|
Sensor-with-Cord Type Probe No. 8922-00 SK-RHCS-2 |
|
|
Flexible Type Probe No. 8922-10 SK-RHCS-3 |
|
■ Use isolated wirings for temperature and humidity terminals for devices connected to SK-940A-I because all the positive side of the circuit is unified.
Install an isolator if said terminals are grounded together.
Specifications
| Cat. No. | 8920-03 | |
| Product name | Temperature/Humidity Transmitter | |
| Model name | SK-RHC-I | |
| Measuring range | Depends on probes. Refer to specifications of probes. | |
| Display range | Temperature | −15 to 65.0°C |
| Humidity | 5.0 to 99.0%rh | |
| Measuring accuracy | Refer to specifications of probes | |
| Display accuracy | Temperature | ± (0.1+1 digit)°C |
| Humidity | ± (0.1+1 digit)%rh | |
| Output accuracy | ±1.0°C / ±1.0%rh | |
| Resolution | Temperature |
0.1°C (10°C and up) 1°C (other) |
| Humidity |
0.1%rh (15%rh and up) 1%rh (other) | |
| Output | Temperature | 4 to 20 mA for −15 to 65°C |
| Humidity | 4 to 20 mA for 0 to 100%rh | |
| Operation ambient | −10 to 60°C, less than 80%rh without condensing | |
| Refresh time | 1 or 10 sec. switchable manually | |
| Alarm |
Hi/Lo alarm output as a relay contact Maximum rating for alarm output: survival voltage 48 VAC/DC, ramp load current 1 A * One threshold, either upper or lower limit, can be set for temperature and humidity respectively. | |
| Materials | ABS resin, acrylic glass | |
| Dimensions | 118 (W) x 100 (H) x 42 (D) mm | |
| Weight | 210 g | |
| Power | 12–14 VDC or AC adapter sold separately | |
| Applicable probes | SK-RHCS Series | |
| Standard accessories | Probe fitting screw x1, instruction manual | |
