Pen Type pH Meter

■ How to calibrate (Japanese audio)

Feature

■ Calibration is available by choosing up to three points from pH 4.01, 6.86, 9.18, or 10.01.

* The pH above are under condition of 25°C.

* Calibration solutions are sold separately. For accurate measurement it is recommended to use calibration solutions.

■ Display hold function

■ Automatic temperature compensation

■ Sensitivity display of the sensor

■ Calibration, holding of the display, and auto power-off available

■ Stability display function

■ IPX5 waterproof: handling with wet hands available.

IP waterproofness definition:

IPX1	Can resist waterdrops falling vertically.
...
IPX5	Can resist water jet spray from any direction.

■ Replaceable sensor

Description

■ Caution

Calibration solutions are sold separately. For accurate measurement it is recommended to use calibration solutions.

■ Notice

- The sensor may be damaged to shorten its life if it is used for liquids such as organic solvents, oils, adhesives, surface-active agents, strong acids (pH 0 to 2), or strong alkalis (pH 12 to 14).

- The reading may become unstable if you measure pure or tap water.

- If you measure food or drink, take a sufficient quantity of a sample in a separate container so that the end of the sensor is immersed at least 3 cm in the sample. Do not eat or drink the sample after measurement.

- The sensor is made of glass, so take a great care in handling. Be careful not to injure yourself when it is broken.

■ Lineup of calibration solutions

Calibration solutions

Catalog No.	Item
6401-10	Phthalate Solution, pH 4.01, 500 mL
6402-10	Neutral Phosphate Solution, pH 6.86, 500 mL
6403-10	Carbonate Solution, pH 10.01, 500 mL
6404-10	Borate Solution, pH 9.18, 500 mL

Calibration solutions with certificates by JCSS, an ILAC-accredited authority

Catalog No.	Item
6401-00	Phthalate Solution, pH 4.01, 500 mL
6402-00	Neutral Phosphate Solution, pH 6.86, 500 mL
6403-00	Carbonate Solution, pH 10.01, 500 mL
6404-00	Borate Solution, pH 9.18, 500 mL

Specifications

Cat. No.	6430-00
Product name	Pen Type pH Meter
Model name	SK-662PH
Measuring range	pH: 0.00 to 14.00 Temperature: 0.0 to 50.0°C
Accuracy	pH: ±0.05 Temperature: ±0.5°C
Resolution	pH: 0.01 Temperature: 0.1°C
Functions	- Three-point calibration (pH 4.01, 6.86, 9.18, or 10.01) - Hold function - Auto power-off - Auto temperature compensation - Sensor sensitivity display to self-check deterioration - Stability display of measured value
Detectors	pH: Glass electrode with non-refillable KCl solution Temperature: Thermistor
Waterproofness	IPX5 waterproof
Materials	Main body: ABS resin Sensor electrode: Glass
Dimensions	38 mm diameter x 171 mm (L)
Weight	82 g including batteries
Power	Button cell LR44 x4
Standard accessories	Hand strap x1, button cell LR44 x4, instruction manual