No.1850-00
2-ch. Min-Max Digital Thermometer
PC-3710
JAN code : 4974425801640
Calibration : Available
JCSS Accredited Calibration : Available
PC-3710 is a digital thermometer to monitor two locations at the same time, with an internal sensor and an external probe.
The 3-meter-long external probe detects down to −50°C, while the internal sensor measures down to −5°C.
Minimum and maximum temperatures can also be shown.
Instruction manual
Feature
■ Two channels of temperatures
- Displays temperatures at the internal sensor (IN) and the external probe (OUT) simultaneously.
■ Maximum and minimum temperatures shown by simple key presses
■ IPX5 waterproof
- Safe to use in an environment with water splashes
■ Resolution 0.1°C
- Good for precise monitoring
■ Be hygienic
- Contains antimicrobial in the body.
- Sensor part in the external probe is made of hygienic stainless steel.
■ Three ways to install
Description
■ How to check minimum (MIN) and maximum (MAX) temperatures
Short press of the key changes the view in the order of the current, MAX, MIN temperature, and goes back to the current temperature.
MIN and MAX is reset when either one of the following conditions is met:
- When the battery is replaced
- When the key is pressed for 3 seconds
Specifications
| Cat. No. | 1850-00 | |
| Product name | 2-ch. Min-Max Digital Thermometer | |
| Model name | PC-3710 | |
| Measuring range | Internal sensor | −5.0 to 50.0°C |
| External probe | −50.0 to 70.0°C | |
| Accuracy | ±1.0°C (0.0 to 40.0°C) ±2.0°C (other) | |
| Resolution | 0.1°C | |
| Sampling time | 10 seconds * Temperatures of internal sensor and external probe measured alternately every 5 seconds | |
| Indicated items | Simultaneous display of temperatures at internal sensor and external probe | |
| Waterproofness | IPX5 waterproof * Resists water only when the connector cap is closed, or the external probe is connected. * Do not put the probe underwater. | |
| Operating ambient | −5 to 50°C, less than 80%rh without condensing | |
| Power | AAA battery x1 | |
| Battery life | Approx. 2 years under room temperature, with alkaline battery | |
| Material | Body | ABS resin with antimicrobial, silicone rubber |
| External probe | Sensor part: SUS304, PE resin Cable: PVC resin (heat-resistant up to 50°C) | |
| Dimensions | Body | 67 (W) × 65 (H) ×22 (D) mm |
| External probe | Sensor part: Ø5.5 × 11 mm (resin part Ø7.9 mm) Cable: 3 m long | |
| Weight | 71 g including battery | |
| Accessories | AAA battery x1, clasp for holding external probe x1, instruction manual | |
